Discleaner Manufacturer and Supplier in India
Concentrated Separator Disc Cleaner: Rochem DISCLEANER- Trusted Distributor in India
URSA Associates supplies Rochem DISCLEANER, a powerful liquid compound meticulously formulated to effectively remove tough carbonaceous and varnish deposits from lube and fuel oil separator discs.
Enhance your equipment efficiency with high-performance cleaning solutions from URSAA. Contact URSAA today to get the best quality Discleaner for reliable as well as effective maintenance.
General Specifications
- Appearance: Clear, Colorless Liquid
- Sp. Gravity 20°C: 1.3 - 1.4
- pH (10% solution): 1.5 to 2.5
- Flash Point: None
- Freezing Point: -5°C
- Solubility: 100% in water
Advantages
Rochem DISCLEANER offers significant benefits to operators of lube and fuel oil separators:
- Highly concentrated and fully water-soluble.
- Easy to dilute, ensuring rapid cleaning and cost-effectiveness.
- Safe for stainless steel discs, does not damage them.
- Free from chlorinated hydrocarbons, environmentally safe.
Usage
This product is ideal for cleaning both lube oil separator discs and fuel oil separator discs. The separator can be cleaned either through in-place circulation (if properly equipped) or by immersing individual units, disc sets, etc., as well as by spraying or scrubbing as needed.
Dosage
A ratio of 1 part Rochem DISCLEANER to 4 to 8 parts water is recommended based on the severity and quantity of deposits, although it can be used neat if desired.
Application
Immerse the parts in the Rochem DISCLEANER solution for one to three hours. Utilize any suitable container (except galvanized) for immersion. For faster cleaning, use slight agitation and/or warm the diluted DISCLEANER to a temperature of 50 to 60°C (122-140°F). Thoroughly rinse the parts with fresh water after cleaning.
Handling Precautions
Treat it with caution, similar to handling an acid. Use water-protective gloves, goggles, and appropriate clothing. If the product comes into contact with skin or eyes, immediately flush with water for at least 15 minutes while removing contaminated clothing. Seek medical attention.
Frequently Asked Questions
1. What is Discleaner used for?
Ans: Discleaner is a concentrated liquid cleaning chemical. It is designed to remove carbon deposits, sludge as well as varnish from lube oil and fuel oil separator discs.
2. Is Discleaner safe for separator discs?
Ans: Yes, it is safe for stainless steel discs as well as does not cause damage when used as recommended.
3. How is Discleaner applied?
Ans: It can be applied through immersion, circulation, spraying, or manual scrubbing depending on the cleaning requirement.
4. What is the recommended dilution ratio?
Ans: Typically, a dilution of 1 part Discleaner to 4–8 parts water is recommended. It depends on the level of deposits.
5. How long should components be soaked in Discleaner?
Ans: Components should be immersed for approx 1–3 hours for effective or cleaning that too with optional heating for faster results.
6. What safety precautions should be followed while using Discleaner?
Ans: Since it behaves like an acidic solution, users should wear gloves, goggles as well as protective clothing as well as rinse thoroughly in case of contact.