Eni Aquamet Ifu
ENI AQUAMET IFU – Emulsifiable Metalworking Fluid
ENI AQUAMET IFU is a high-performance emulsifiable metalworking fluid designed for cutting and grinding operations. It is formulated from selected base stocks and advanced additives that ensure excellent emulsion stability even in hard water conditions.
It provides effective corrosion protection, superior cooling performance and long emulsion life due to the presence of biocides and rust inhibitors. The product is suitable for a wide range of machining applications across ferrous and non-ferrous metals.
Technical Characteristics (Typical Figures)
| Property | ENI AQUAMET IFU |
|---|---|
| Appearance | Clear |
| Density at 29.5°C (gm/cc) | 0.889 |
| Kinematic Viscosity at 40°C (cSt) | 22.54 |
| Emulsion Test (5:1 ratio) | Passes |
| pH of Emulsion (5:1) | 9.0 – 9.7 |
| Thermal Stability Test | Passes |
| Cast Iron Corrosion Test | Passes |
Properties & Performance
- Forms stable biostatic milky emulsions with high cooling efficiency
- Excellent resistance to bacterial breakdown
- Low foaming tendency ensuring smooth machining operations
- Provides superior anti-wear and EP performance
- Enhances tool life and reduces wheel dressing frequency
- Ensures fast swarf removal and improved productivity
- Operator-friendly and economical in use
Applications
ENI AQUAMET IFU is recommended for a wide range of cutting operations on both ferrous and non-ferrous metals. It is especially suitable for operations where high cooling efficiency is required such as turning, drilling, milling, tapping and grinding.
Recommended Dilution
| Operation | Cast Iron | Stainless Steel | Non-Ferrous |
|---|---|---|---|
| Turning | 3–4% | 4–5% | 4–5% |
| Drilling | 3–4% | 4–5% | 4–5% |
| Milling | 3–4% | 4–5% | 4–5% |
| Tapping | 4–5% | 5–7% | 6–8% |
| Grinding | 3–4% | 3–4% | 2–3% |
Recommended Procedure
Before charging fresh coolant, the system should be cleaned thoroughly. Circulate a system cleaner for adequate time and remove all residues. Prepare the emulsion by adding oil to water with proper agitation. Avoid mixing in stagnant conditions and do not use galvanized containers.